TERMINATOR-HSD removes petroleum stains from concrete, asphalt and stone. There is no need for power washing or other water based cleaning techniques. The Microorganisms in TERMINATOR-HSD quickly consume all petroleum compounds leaving an environmentally friendly residual of Water (H2O) and Carbon Dioxide (CO2).
The EPA prefers bioremediation over pressure washing, chemicals or detergents. Simply sprinkle TERMINATOR-HSD lightly over your stained area and sweep into the pores, then walk away! TERMINATOR-HSD’s hungry Microbes will do the rest.
How does Terminator-HSD work?
TERMINATOR-HSD is a powder containing a blend of highly concentrated microbes and proprietary absorbent. The microbes are cultured specifically to biodegrade organic compounds including motor oil, crude oil, gasoline, hydraulic fluid, solvents, cooking oil and kitchen grease. TERMINATOR-HSD contains proprietary nutrients that stimulate microbial appetite and growth, resulting in accelerated remediation of a spill or oil stained area. TERMINATOR-HSD is safe, non-toxic and easy to use. The major by-products from the biodegradation process are carbon dioxide (CO2) and water (H2O).
TERMINATOR-HSD is non-toxic and easy to use. The major by-products from the biodegradation process are carbon dioxide (CO2) and water (H2O).
STORMWATER PERMIT COMPIANCE
Regular use of TERMINATOR-HSD in parking lots and industrial yards will aid in stormwater compliance. Spilled petroleum compounds are bioremediated on an on-going basis. Consult a TERRADIS representative for a proper maintenance schedule for your facility.
ABSORPTION AND CONTAINMENT
TERMINATOR-HSD Concrete Cleaner attracts and binds hydrocarbons, holding them in place during biodegradation. Once absorbed, contaminates will not migrate as they bioremediate.
DIRECTIONS FOR USE
Concrete Cleaning (Oil Stains on Concrete, Asphalt and Porous Stone): Sprinkle TERMINATOR-HSD sparingly over dry stained area. 1 cup will cover up to 100 square feet of concrete– 10 oz will treat 25 to 50 small oil spots! Sweep product in multiple directions to force powder into surface pores. Using a soft bristle broom, sweep excess powder to new areas until there remains nothing left to sweep. It is not necessary to wet area, mother nature will complete the job. To speed results, moisten area lightly, being careful to not cause water run off, and reapply weekly until stains have faded as desired. Most stains will be eliminated in 1 to 4 applications. Due to the more porous nature of Asphalt, more product is used during treatment.
Fresh Petroleum Spill on Hard Surfaces: For fresh spills on hard surfaces (ie: concrete or asphalt) spread enough product to soak up all pooling hydrocarbons. Once absorbed by TERMINATOR-HSD, all petroleum hydrocarbons are fully encapsulated and will be completely bioremediated, resulting in environmentally safe compounds such as water and carbon dioxide. Absorbed material may be left for nature to bioremediate, or may be swept up and disposed according to local regulations.
Petroleum Spill on Soil: TERMINATOR-HSD should be applied at a proper volume to fully absorb, contain and immobilize the spill. For best results, till the ground a few inches, allowing the microbes more direct contact with all spilled compounds – this also promotes needed oxygenation. For quickest results, moisten the area with water; however, do not saturate to the extent where run-off occurs. Once absorbed by TERMINATOR-HSD, all petroleum hydrocarbons are fully encapsulated and will be bioremediated. It is not necessary to remove or dispose of the absorbed material. Consult a TERRADIS representative for a specific treatment protocol for large spills.
Spills and Stains on Rocky Areas: Consult a TERRADIS representative for the proper treatment protocol.
TERMINATOR-HSD Concrete Cleaner is available in both residential and industrial sizes including 10oz, 2lb, 25lb and 50lb containers.
RECOMMENDED ORDERING SIZES